I have applied a yellow film to aftermarket lights and other drivers really notice.

Otherwise Kewig K10 lights on Amazon are a good kit with quality wiring etc for about $99. Yellow fog and white driving lights with just a second tap on the switch. Different beam patterns for the 2 colors. I bought a second pair for my DR650 after buying for DL800.

 

Thanks, The kewig lights look like a nice compact kit.

How does the film hold up over time? Looks like I can get a sheet that could be used to cover both lights or various precut pieces for a reasonable price.

 

I bought good quality yellow film on Amazon for about $16 roll. It can be hit with a heat gun or hair dryer for a snug fit and it has held up great for a few years. I think it looks factory.

 

I painted the inside of the lenses with an amber pain. It's working well and I am visible according to my friends.

 

I've used an aftermarket yellow lens film on my GL1800's OEM lights and they show up real well and lasted fine. On my 2020 1050XT, I have Denali driving lights which came with clear lenses. They also offer yellow and orange lenses. Changing lenses requires removing with a 2.5 mm allen wrench (and not losing) 4 small screws to change each lens. In the dark, on the side of the road, that's not going to happen. I didn't want to have to deal with all that if I if I found myself needing to ride at night, and knew I wouldn't bother if it was not going to be a long night ride. To get around that, I used narrow straps of velcro on the colored lenses and the Denali light frame. The velcro is hidden and can’t be seen when the lens is on. It takes about 2 seconds to slide the screwdriver blade of my pocket knife in there to pop them off. When I am riding daylight the next day, I stick them on again. Works great.

 

Have you looked at whoever makes the lights and look to see if they make snap on covers. A lot of the better fog light manufactorers do.

 

Made by piaa and they make snap on covers depending on the lamp model.

 

I got a set of flip down fog light cover for my R1250GSA. Not sure if they make something for Suzuki or if the BMW ones could be modified to work. or $22 it might be wort a shot.