StromTrooper banner
1 - 3 of 7 Posts

· FORUM GODFATHER.....R.I.P. PAT
Joined
·
38,702 Posts
You want an orange/green or a brown wire. Brown changes to gray at the fender to subframe connection. The O/G wire for the OEM heated grips behind the radiator or the one leading to the rear brake switch and the brown wire in the sheath running along the left side of the under seat tray are good points. If you would rather avoid cutting into the stock harness, Eastern beaver has plug in modules that provide trigger wires.
Suzuki VStrom Electrics
Suzuki VStrom Electrics
Suzuki VStrom Electrics
 

· FORUM GODFATHER.....R.I.P. PAT
Joined
·
38,702 Posts
I hear ya. I used the brown wire myself. I just cut a slit in the sheath running to the left of the under seat tray to get at it. Don't worry about any colored dots. They are not part of the color code but a length measuring aid. I did use a connector on the trigger wire so I could unplug the relay if I wanted to actually use the parking light.
 

· FORUM GODFATHER.....R.I.P. PAT
Joined
·
38,702 Posts
1 - 3 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top