StromTrooper banner

Throttle out of slow 2nd gear corners (sensitivity)

3963 Views 25 Replies 13 Participants Last post by  marshallnoise
Ok, so I have been a lurker here for a few months now and have decided to get thoughts on this question.

Is there any way to deal with low RPM surge that occurs above idle, but below the 3500 rpm stumbling area of the rpm range. Asking, because this bike is definately throttle sensitive and I am getting smoother and smoother, but at times cannot seem to keep it smooth when coming out of corners without a slight surge. It is mainly when I am taking a 2nd gear turn and beginning to apply throttle as I go through the corner. I have a PC III (currently using Dynojets stock map), tips cut out of the exhaust, secondary's are unknown at this point (bike is still new to me).

Thanks, and have found this site hugely informative, so thanks for everyone's feedback.
1 - 2 of 26 Posts
Low RPM surge? Do you mean how the engine just chugs after getting back on the throttle when the RPMs are down? My experience has always been that its just a big engine that needs some clutch out of slow second gear turns.
When running the 17/43 do you know how much the mph drops in 6th gear at 4k rpm. Iirc im around 70mph with the stock gearing.
1 - 2 of 26 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.