StromTrooper banner

1 - 3 of 3 Posts

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #1 (Edited)
:) Hi Everyone; When I built the custom map for the Akrapovic Exhaust I promised everyone I would set up a Dyno Day with my tuner to give some of my fellow Stromtroopers in the PNW, and in the lower mainland of BC, a chance to get their bikes dialed in as well at a reasonable rate by a competent tuner on a great Factory Pro Dyno,

Email me Directly at [email protected] if you would like to participate, No PM Please, Email me only on this one,

It will be held at 10:00 AM on August 12, and will be open to a maximum of 6 or 7 bikes this time so that we have time to dial everybody's bikes in during the day,

We will use my custom map as a base starting point and tune your bike based on the power commander, air filter and exhaust you have and if you bring a memory stick with you I will put the map of your bike on it for you to save for the future and if not I will save it for you and Email you the copy for you to save,

Cost is flat fee $150 and will be prepaid so no worrying about money there,

You do need a power commander to do and benefit from the tuning,

The Dyno is located just south of Richmond BC off of Highway 99, Which is the Canadian side continuation of I-5, an easy drive up to Canada from the PNW and lots of fun. I will be coming in from Ferndale to host the event and make sure everyone gets a great dyno-tune for their bike,

Open to DL650 and DL1000 all model years,

Email me at [email protected] for details and to book your spot, No PM on this on Please, Email me only,
i
This is the best opportunity you will have to get your bike professionally tuned and dialed in for your smoothest torque and HP Curve, It makes the bike so much more fun to ride and more efficient. All that will be left for you to do is learn to control your right wrist,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #2
:) Hi Everyone, The Dyno is booked for my fellow Stromtroopers private use on August 12th. I have had some very positive responses from Stromtroopers within ride in range and from fellow Stromtroopers further away who wish that they could make it.

This may well be the one chance this year that the moon and sun and stars align to give us the opportunity to do this tuning day for my fellow Stromtroopers,

If you are anywhere near the area and already have or intend to get an aftermarket exhaust, Have a Power Commander or would like one installed and or a K&N High Performance Air Filter, This is the time to pull all the parts together and get them tuned properly with your bike,

Our goal, and the reason it can only be a small 6 - 7 party group, is to get you on the dyno, load the base map onto your bike, run your bike gently on the dyno, set the torque and HP curves up for you and send you out for a ride to see how you like it so far and if necessary get you back on the dyno for final tweaking,

This is a dyno day you will not want to miss,

Email me Directly at [email protected] and let me know your interest,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #3
:) Hi Everyone; Here is a Heads Up Reminder that the Dyno Day Opportunity is now only 8 days away,

When I built the custom map for the Akrapovic Exhaust I promised everyone I would set up a Dyno Day with my tuner to give some of my fellow Stromtroopers in the PNW, and in the lower mainland of BC, a chance to get their bikes dialed in as well, at a reasonable rate, by a competent tuner on a great Factory Pro Dyno,

Email me Directly at [email protected] if you would like to participate, No PM Please, Email me only on this one,

It will be held at 10:00 AM on August 12, and will be open to a maximum of 6 or 7 bikes this time so that we have time to dial everybody's bikes in during the day,

We will use my custom map as a base starting point and tune your bike based on the power commander, air filter and exhaust you have and if you bring a memory stick with you I will put the map of your bike on it for you to save for the future and if not I will save it for you and Email you the copy for you to save,

Cost is flat fee $150 and will be prepaid so no worrying about money there,

You do need a power commander to do and benefit from the tuning,

The Dyno is located just south of Richmond BC off of Highway 99, Which is the Canadian side continuation of I-5, an easy drive up to Canada from the PNW and lots of fun. I will be coming in from Ferndale to host the event and make sure everyone gets a great dyno-tune for their bike,

Open to DL650 and DL1000 all model years,

Email me at [email protected] for details and to book your spot, No PM on this on Please, Email me only,
i
This is the best opportunity you will have to get your bike professionally tuned and dialed in for your smoothest torque and HP Curve, It makes the bike so much more fun to ride and more efficient. All that will be left for you to do is learn to control your right wrist,

Enjoy the ride, and best regards,
Blair
 
1 - 3 of 3 Posts
Top