StromTrooper banner

1 - 20 of 82 Posts

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #1
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #2
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #3
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #4
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Registered
Joined
·
21 Posts
Quick Service

Ordered my sliders on Wednesday and received them on Friday. Blair was prompt in responding to my emails and clearly interested in customer satisfaction.
Marty
 

·
Registered
Joined
·
3 Posts
Nice product, quick delivery, easy install

Ordered up my frame sliders from Blair last weekend, he shipped on Monday and I received it at my home in Calgary on Fri after it had cleared customs. Easy peasy install (took all of 10 minutes). I really like the look of them and feel good about the extra protection they'll provide if the bike goes down.

Blair is a great guy to deal with......if you're considering frame sliders you won't be disappointed with these or the service Blair provides.
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #7
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #9 (Edited)
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #10
Installation Video for SV Racing Parts, Frame Sliders

:) Hey Everyone, here is an Installation Video another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

These parts are in stock and ready to ship to you today,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #11
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #12
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #13
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #14
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #15
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #16
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #17
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #18
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #19
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 

·
Vendor
Joined
·
5,008 Posts
Discussion Starter #20
:thumbup: The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
 
1 - 20 of 82 Posts
Top