StromTrooper banner

Need new bars 2018 1000 xt

2175 Views 4 Replies 4 Participants Last post by  JBNY
As the title says I need new bars. After installing ricks 2 inch extended lines and rox risers I have figured out it’s the sweep of the bars that I don’t like.

What are the favorite bars folks are using with less sweep? Protaper adventure or are they to close to stock sweep on 18 v1000xt? Protaper ATV high or mid? Also will the stock hand guards fit with protaper bars?

thanks
1 - 5 of 5 Posts
The is a Protaper Adventure (not high) with the stock 2018 1000 XT bars. They are pretty close to the same sweep...I didn't install them, but I'd be interested in finding something with a bit less sweep.

Automotive tire Motor vehicle Automotive lighting Vehicle Automotive design
See less See more
  • Like
Reactions: 1
Mfaulkner Thank you for the picture. That helps takes the adventure bars out of the list. Looks like we are both looking for the same kind of bars. Hopefully we get more input.
2
I have been playing around with swapping out my bars for the Tusk Chub bar, ATV High Bend. Stealing from MFaulkner's idea, I posted a pic below. They definitely don't have as high of a bend as the stock bars, however the sweep looks about the same
Motor vehicle Automotive tire Bumper Font Automotive wheel system

Automotive fuel system Motor vehicle Fuel tank Automotive tire Light





See less See more
As the title says I need new bars. After installing ricks 2 inch extended lines and rox risers I have figured out it’s the sweep of the bars that I don’t like.

What are the favorite bars folks are using with less sweep? Protaper adventure or are they to close to stock sweep on 18 v1000xt? Protaper ATV high or mid? Also will the stock hand guards fit with protaper bars?

thanks
Did the Rox only raise your bar?
I put some on that raised them I think 1.5 up and 1 inch back.
Did not need to extend the lines which was great.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top