StromTrooper banner

Installed Risers ,now bike won't crank ,red indicator on dash doesn't go off!

701 views 2 replies 2 participants last post by  p38arover 
#1 ·
Put on some 1" up and back handlebar risers today .....wiring was a little tight in the process but nothing that i thought would cause any wires to break or even a connector to pull apart ,but something is wrong. Dash does it check and everything seems right except the RED temp/oil pressure indicator doesnt go out and the starter wont crank.The bike is a white 2013 650 and I really like it ,just about have 500 miles on it .Feeling really stupid that i've screwed up on such a simple job!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top