StromTrooper banner

I. D. these lowering links

796 Views 2 Replies 3 Participants Last post by  greywolf
I came by a set of lowering links, 6 mm longer than standard, made from aluminum, no name on them.

Can anyone identify the maker and how much they'll lower the bike?


Thanks
1 - 3 of 3 Posts

· FORUM GODFATHER.....R.I.P. PAT
Joined
·
38,702 Posts
The ratio is a little under 3x the link difference so about 17mm. Is the alloy mentioned? 7075 is better than 6061 and T6 treatment is what you want. Anything less can pull apart.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top