StromTrooper banner

1 - 2 of 2 Posts

·
Registered
Joined
·
168 Posts
Discussion Starter #1
Hi guys, i had a bit of an incident with my clutchrod breaking. Not exactly of its own fault, but because the chain was not adjusted properly, my front sprocket was large and the chain hit the rod and broke it.

This is the breakdown video
https://youtu.be/-teabNc-2w4

And this is the install of the pushrod and chain and sprockets, i went back to regular sprocket ratio.
https://youtu.be/pRPWaM6KzgQ

Maybe it will help someone out there if they ever have their pushrod broken.
 

·
Registered
Joined
·
557 Posts
Hi guys, i had a bit of an incident with my clutchrod breaking. Not exactly of its own fault, but because the chain was not adjusted properly, my front sprocket was large and the chain hit the rod and broke it.

This is the breakdown video
https://youtu.be/-teabNc-2w4

And this is the install of the pushrod and chain and sprockets, i went back to regular sprocket ratio.
https://youtu.be/pRPWaM6KzgQ

Maybe it will help someone out there if they ever have their pushrod broken.
Nice job, thanks for the video. I had my clutch pushrod snap on Easter. It was a breeze to replace. I was thinking about replacing the seal but I saw it was more involved than I wanted to get, so I stuck it back in the toolbox in case the original shows signs of leaking.
 
1 - 2 of 2 Posts
Top