Horn
1 - 4 of 4 Posts
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Rebuild after broken chain and fire
DL1000 from 2002-2012It has begun! @teevee donated a rear shock and a guy at work donated a 530 chain, and I finally got out of my funk, so I started tearing into it today. First order of biz was to make sure no wiring was damaged by the fire. Rear wheel off, bad chain re-broken and removed, and inspection reveals...- 201
- 14K
-
WildDoktor · updated
-
09 Vee misses above 8k
DL1000 from 2002-2012Hopefully I can find someone that knows better than me on this one... I have an 09 Dl1000 with 20k miles which runs and drives great. It does occasionally have what feels like a miss or stumble at full throttle from 8k - 9k RPM. It’s difficult to describe other than it doesn’t pull smoothly when...- 34
- 990
-
Kevincasey82 · updated
-
04 Vee - LED headlight install
DL1000 from 2002-2012I've been agonizing over LED headlights since my last bike. :-) After *way* too much research, I finally pulled the trigger on a pair earlier this week and hoped for the best. They arrived yesterday, I installed them, and must say: I'm happy! Here's what I ended up with. I bought the H4 version...- 199
- 34K
-
WildDoktor · updated
-
Chain and sprocket replacement options
DL1000 from 2002-2012The time has come to change my chain. There is a section that is sticky and makes a noise every time it goes around. I have read about staying with stock gear sizes, and also making a change in teeth. When I ride I do not care for high speeds, at most I would maybe go 130 KPH indicated. If...- 4
- 175
-
Max in Montreal · updated
-
Tool Tube for DL1000 Project competed
DL1000 from 2002-2012Been looking for a Youtube video or posts regarding attatching a Tool Tube to a DL1000 - 2006 but didnt have much luck. Plenty of info on the DL 650 as its much easier to attach with only one exhaust so decided to tacke this project and see if it could be done. I decided that I would mount it on...- 11
- 376
-
Oily · updated
Join now to ask and comment!