StromTrooper banner

1 - 3 of 3 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
Hi there! My name is Paul and I was going to introduce myself
in the new member section but I ran into a problem with my
DL650. I purchased this bike one month ago as a salvage and
I just finished putting it back together last night. The bike is
an '05 model with an '04 frame. I purchased some aftermarket
turnsignals for the front and connected them last night. At first
when I tested them both turnsignals worked. After finishing the
final install onto the fairing, the signals are now not working. I tested
the front signals tonight by plugging them into the rear turn signal
connections and both front signals worked. The bike has a new battery.
Any ideas or suggestions?

One more thing, my brake light is not working. Both the front brake
and the rear brake light will not light, any clues to this one?

I checked all the small fuses, they are all good. The bike starts
and runs fine.
 

·
Registered
Joined
·
21 Posts
Discussion Starter #2
Well, I am answering my own questions, which is not bad after all
since I learned something from this. I had crossed the wires on one
of the front turn signals, after re-installation they work great.

Regarding the brake light not working, the connection for the wires to
the rear brake pedal was not screwed in far enough and the brake
light now works as well.

Pictures to follow in the new member section.:D
 

·
Premium Member
Joined
·
1,458 Posts
Welcome to the site Paul!

Glad we could help :D


SS
 
1 - 3 of 3 Posts
Top