StromTrooper banner

Emptying Wee tank for storage

2K views 13 replies 8 participants last post by  richw 
How about fogging the tank the same as you would the engine for storage. Advantage over oiling, is, how do you get the oil out. It would take a cup to a cup & a 1/2 to get the whole tank coated, and quite some time rolling the tank about. That's a lot of oil to burn in the first tank:yikes:. Might foul a plug or two too.
Not much fuel left in the injectors and their lines, but you could put stabil in the last tank you use, and then the residue would be stable for 6 months or so.
 
If you ran the bike low with OVER stabilized gas

Just took off the injector side of the line and ran it into a bucket with the ignition on.

Note The fuel pump is cooled by the liquid gas so maybe a problem, but just to get the last out I wouldn't worry.

I would then start the bike and let her run out all together because there is gas in the entire injector system of course when pressure went low she would stall with gas in the lines

I still would want to take the tank off and with oil and fogger turn her over and over to coat the surfaces
I would just like to mention the safety aspect of starting a motor next to open fuel.:jawdrop::thumbdown: I know you can get away with it a 100 times, but.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top