Joined
·
1,872 Posts
If I was storing long term I would:
1: Run Stabil through the machine.
2: Syphon fuel out, start bike and run out fuel, remove tank.
3: Coat inside of tank with oil
4: Pour some oil into the cylinders via the plug holes
5: Turn over engine with plug leads off, coating cylinder walls
6: Plug exhaust with rag.
1: Run Stabil through the machine.
2: Syphon fuel out, start bike and run out fuel, remove tank.
3: Coat inside of tank with oil
4: Pour some oil into the cylinders via the plug holes
5: Turn over engine with plug leads off, coating cylinder walls
6: Plug exhaust with rag.