StromTrooper banner
1 - 1 of 1 Posts

·
Registered
Joined
·
69 Posts
Discussion Starter · #1 ·
I am rebuilding the clutch on my 09 DL650A and have a pressure plate question. I ordered a new plate P/N 21462-1403 and find the new part looks different from the old part, see attached pics. The cogs on the old part are flush on the plate and the cog teeth extend beyond the plate face on the new one.
They both appear to hold the springs the same and the fiber plates sit the same. My concern is will the teeth sticking out cause the plate to not fit.
I know, I know, try to dry fit it together but I thought I would ask first.
 

Attachments

1 - 1 of 1 Posts
Top