[kamloopsal]

Not sure of the measurement, but here is a location that works.
Does that help?

Pics 'borrowed' from Adventure MotoStuff

 

[saturn 5]

G'day M.L. Look for the "high tide" mark on forks where the fork seals stop. Should be visible even if the seals are good. Measure up using this position.

WARDY

 

[Heavy-H]

Put a zip tie around a fork tube then go try to bottom it, that will give you your measurement........

 

[kamloopsal]

Put a zip tie around a fork tube then go try to bottom it, that will give you your measurement........

Brilliant! Why didn't I think of that

 

[MountainLagoon]

Thanks,

I am overseas due to work at the moment therefore I cant measure my Strom, so I was hoping someone has already done the measurements in the past.

I have ordered the smaller size denali LED lights and was wondering if they would fit just under the headlights without being hit by the mud guard when the forks are at full compression. If they are OK mounted there I wont need to order the pictured mounting bracket.