StromTrooper banner
1 - 5 of 5 Posts

· Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
Would anyone mind sharing tips on cleaning the exterior of the Trax Alu Boxes? These great side boxes came on the used 08 DL 650 I just bought. But the previous owner put stickers on them. When I removed the stickers you can still see where they were located. I'd like to get them looking as new as possible. Any and all advice is welcome.
 

· Premium Member
Joined
·
413 Posts
Simichrome metal polish is good. It works on Alum. Try polishing them with it or something simular.

Hope this helps
 

· Premium Member
Joined
·
390 Posts
try

try WD-40 = spray it on, let it soak for a few minutes rub the old glue off with a rough rag or a scotch bright pad. Done deal. If you use a heat gun / hair dryer to remove the stickers, spray them with the WD-40 ASAP, best while the glue is still warm.
 

· Registered
Joined
·
24 Posts
Discussion Starter · #5 ·
Thanks for the input.
The information that came with the boxes says the exterior is sealed or treated. They say to not use strong cleaners so I'm a little worried about taking off the sealer. Maybe Googone is the best solution.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top