StromTrooper banner

1 - 3 of 3 Posts

·
Registered
Joined
·
68 Posts
Discussion Starter #1
I'm installing Dan Vessel's soft bag bracket on the RHS of the bike. I need to remove the RH buddy pegs. They are allen bolts. They are VERY tight. I want to be sure to put em back on as tight as need be. Cant find info in the Suzuki Maint. Manual.

Torque? Lock tite?

Thanks!
 

·
FORUM GODFATHER.....R.I.P. PAT
Joined
·
38,103 Posts
It's not a picky fastener so doesn't have the torque specified. It's an 8mm bolt so the general spec is 25.5lb-ft but I've never thought about using a torque wrench on it or using Loctite. If they are hard to break loose, it's probably due to corrosion.
 
1 - 3 of 3 Posts
Top