StromTrooper banner
grips
1-11 of 11 Results
  1. DL650 and DL650A - 2004 to 2011
    Hey, again, guys. Just looking for some grip recs. Mine are looking pretty slick and feel way to small of a diameter for my gigantor hands. Plus, I have to order lower triple clamp bolts, anyway, so I might as well nail two birds with one stone. After doing a little calculation (hand size from...
  2. General V-Strom Discussion
    Hi. I have a 2006 DL1000 with the oem heated grips (and grip troller), I was wondering if there is a way to wire them to a switch instead? For more even heating. I apologize if this is mentioned somewhere else though I have been looking for a few days and haven't came across the answer. Thanks!
  3. DL650 and DL650A - 2004 to 2011
    I'm sure many of you have done this. what's a good set of L/R grips for standard 7/8th, including throttle sleeve tube? does not have to be fancy... I'm covering with Grip Pups
  4. AdventureTech LLC
    A new idea in grips. Turn your present grips into comfortable foam grips with a minimum of work. Simply slip these high quality EPDM foam sleeves onto the existing grips for a great feel. These retail for $14.00 a pair. We sell them for $10.50 a pair and we only sell one size - V-Strom size...
  5. DL650 and DL650A - 2004 to 2011
    Last week I picked up a 2007 DL650-V-Strom with 16k miles on it. It's in good shape, has some upgrades, and is very fun to ride. However a few things have been bugging me.... First thing, I think the seat may have been modified to sit lower in the cheapest way possible. There is about a half...
  6. DL650A - 2012-2016
    So I installed Symtec heated grips on my bike. They work great, but they warped my throttle tube and now it sticks. I've contacted Symtec and currently working through a resolution with them. In the meantime, I need a new throttle tube, preferably a metal one that won't get soft and warp with...
  7. Maintenance, Tech and Products.
    worked quite slickly (that is a word, isn't it?)- just stuck the nozzle of a cleaning tip under the edge, the grip starts lifting off, and I just advanced the nozzle under it till it came off. No damage to the grips at all I imagine I am not the first to think of this one
  8. DL650A - 2012-2016
    Hello, I am in the process of buying the new 650 v-strom. I would like to find heated grips that are standard size. I have had aftermarket grips that are like holding a large sasuage in your hands. I would also like to have the ability to vary the heat output. I appreciate any insight(s) you...
  9. General V-Strom Discussion
    I'm planning on installing pro grip 714s on my wee to replace the OEM grips. When I reinstalled the OEMs over the symtec heated grip elements I put on a couple of months ago, I had trouble getting the throttle side grip over the throttle tube, and the end result isn't what I'd like. The...
  10. DL650 and DL650A - 2004 to 2011
    After purchasing the Dual Star Grip Heating Elements almost a year ago, I've finally gotten around to putting them on. The heater elements went on without a hitch, but when I tried to put the switch in the right handle bar control housing, there wasn't enough room, nor was there an easy way to...
  11. Techy World! GPS, Electronics, etc
    Hey Everyone, I've posted a How-To about installing Heated Grips on your Vstrom. http://www.instructables.com/id/Install_Heated_Grips_on_Your_Motorcycle_or_ATV/ -Josh
1-11 of 11 Results
Top