StromTrooper banner
front
1-6 of 6 Results
  1. DL650 and DL650A - 2004 to 2011
    So here's the sequence of events. I'm doing a long ride from Los Angeles to the Canadian border. 2011 Wee. One night, the high beams were flashing randomly, as if a gremlin was randomly hitting the high-beam switch. Low beams stayed on through all that. But then the next day, the headlights were...
  2. DL650A - 2012-2016
    LOOSE FRONT CALIPER ASSEMBLIES Last night, I was doing my usual "pre-flight walk-around" ... I discovered that both front caliper assemblies have "some" play ... This is just a very slight rattle, when torqued by hand ... I had a flashlight but it was not readily apparent how to tighten ... I...
  3. DL650 and DL650A - 2004 to 2011
    Hi guys just got new front break cables and a Double Banjo Bleeder from Blair at SVRacingParts.com Blair told me to replace the banjo bult in the master cylinder with the new double banjo bleeder. Just to make sure since I never change this, is the master cylinder located under the oil...
  4. General V-Strom Discussion
    I have a new 2011 DL650 with 7K KMs (4300 miles) on the clock, stock Trail Wings front and rear. Always carefully set tire pressures to recommned setting (33 PSI Front, 36 PSI Rear). The bike has always displayed some minor bad handling traits. Decel wobble, noise / vibration on the highway...
  5. DL650 and DL650A - 2004 to 2011
    Hello. I have to replace my Front turn signals and want to go to the flush mount style. There seems to be many different styles, and I am wondering what people have used here that both look good and fit well. Also, are you using bulb or LED and if LED does it need some kind of equalizer...
  6. DL650 and DL650A - 2004 to 2011
    I need a new front fender for a 2009 650 with ABS. I've seen the following part numbers, but don't know which one: 53111-06G00-YAY Fender, Front (black) 53111-06G00-YKV Fender, Front (black) Anyone know what the difference is? Thanks, Jake
1-6 of 6 Results
Top