StromTrooper banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. DL650 and DL650A - 2004 to 2011
    My first post. So gents. I have this 2005 wee strom. Has 13k on the clock. It's had a engine rattle since I've obtained it. I know it wasn't a main, rod or engine related noise. Oil pressure is good. No metal in oil. I also split a few oil filters as well. I took clutch cover off to...
  2. DL1000 from 2002-2012
    The first things to go into to clutch basket are two washers or rings. One is flat, the other is conical or angled. Which goes in first and what do they do? They are smaller in diameter than the first friction plate and would seem to float around. When I took them out the flat one was last out...
  3. DL1000 from 2002-2012
    All, I'm currently changing out clutch baskets and am having a hard time removing the oil pump drive gear that is located on the back of the basket. I removed the spring pin clip, and the cylindrical key seems to be moving freely in the slot. The gear is not coming off, its not even moving a...
  4. DL1000 from 2002-2012
    have a 17,000 mile 2003 DL1000. Have had tune up last year, and thottle bodies adjusted and computer checked in spring of 09. Bike runs and idles great, but. At 1,000 to 3,300 I experience that chudder and vibration and I think its in the transmission area. Through shifting in any gear once...
  5. Maintenance, Tech and Products.
    Hello All, I own a 2002 DL1000. I don't know if the clutch basket has been replaced. So, my question is, how can I tell if it is worn out? While installed on the bike there is about 1/16 of an inch of play side to side. Does this mean the springs are worn?? H E L P !!
1-5 of 5 Results