StromTrooper banner
bearing
1-4 of 4 Results
  1. DL650A - 2012-2016
    So, installing new wheel bearings. You are supposed to fully press in one side, install the thru-the-wheel spacer and then install the other bearing by pulling against the bearing you've already installed. This is supposed to pull the second bearing tight up against the spacer and there will...
  2. DL650A - 2012-2016
    Hey all, I want to get these UGLY orange linkages on the bottom of my bike powdercoated, and well, I might as well replace the bearings and what not in the linkages when they're done so that everything is in tip-top shape. I've been googling for some kits to replace the bearings and seals but...
  3. DL650 and DL650A - 2004 to 2011
    I just installed a new rear tire today. When I reassembled the bike I took it for a quick spin and came back to clean and lube the chain. While spinning the wheel I noticed a new sound that I haven't noticed before. I'm hearing a clicking noise that seems to be coming from inside the engine...
  4. V-Strom Service & Maintenance Questions/Discussion
    I just passed the 600 mile mark on my bike. Right before I got to this mark, I started hearing a chain or bearing noise located on the left side of the bike. The noise only starts up when I am going faster than 10-15 mph, and only exists when I am delivering power to the rear wheels...
1-4 of 4 Results
Top