New SV Racing Parts, Scorpion Racing Skid Plates - Stromtrooper Forum : Suzuki V-Strom Motorcycle Forums
SV Racing Parts

 
LinkBack Thread Tools Display Modes
post #1 of 2 Old 12-26-2011, 12:53 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New 2012 SV Racing Parts, Skid Plates for DL650 and DL1000

Hi Everyone, In order to satisfy my own need and desire for a light weight, Highly Robust Skid Plate I ended up turning to my World Class Enduro Racing Rider Friends and asking where to go.

They pointed me to Scorpion Racing, Enduro Race Skid Plate Suppliers, and the quest began; The owner is an Engineer who likes it to be right and work.

I now have our SV Racing Parts, Skid Plates Finished and In Stock, Ready to ship. Remember, I ship worldwide every day so no problem wherever you want it shipped.

Here is the Demo Skid Plate made up as the test fit model Mounted on the test 2004 - 2011 DL650, The shipping versions have two rows of bolt mounts and fit all crash bar sets, These are on SW MoTech Crash Bars,





These are Highly Robust Skid Plates, only 7.2 lbs in weight, Double Welded from inside of joints as well as outside of joints for extra strength, And Powder Coat Finished in a 20 Year Wear Rated material. This material is being used on off road vehicle Skid Plates and tubular style running boards very successfully without marking or chipping.

Our Skid Plate will definitely support the weight of the bike,

BTW: we use the Same Anodizing and Powder Coating facility as Pazzo levers, well known for quality of finish; And once again, These are 20 Year Rated Finish Coats on our Skid Plates so you know they are going to last.

Cost Including Skid Plate Mounting Bracket and Complete upgraded Mounting Hardware Kit is $199.99 all in with $30 Flat Rate Shipping to your door anywhere in the USA,

Gloss Finish if you want a look to match the finish on your Crash bars or other black parts on the bike like the rear passenger peg mounts for example, Very factory like look on this finish. I think it will great if you have a Silver Frame,

I have one of these left in stock after the pre-sales,


I also have the Mat Style of Black Finish in stock, 3 sets only left of these DL650 Skid Plates, Perfect match to the Suzuki Black Frame.


This Mat Finish is the closest I have ever seen to a perfect match to the Black Suzuki Frame and is so subtle and smooth in texture you need to see it to fully appreciate how good it really is. AAA rating from me for excellence.

The Last of the Radiator and Oil Cooler Guards left are being bolted onto the Demo bike for photos with the Skid Plate tomorrow, They are already sold out until Mid-January now, but are being listed at $79.95 as a two piece package.



The Oil Cooler Guard is $32.95; Powder Coated in the Mat Finish and the Radiator Guard is $54.95; Powder Coated in the Mat Finish, as stand alone prices,





These are for the 2004 - 2011 DL650 Vstrom as the 2012 DL650 eliminates the Oil Cooler.

Suzuki was kind enough to allow us direct access to fit and measure the 2012 DL650 and the 2012 DL1000 Models so we know that our Skid Plates are bolt on easy to install.

We are in production on the 2012 Models right now and will have them released for shipping the end of the first week of January when the Mat Finish Powder Coating is done,

When ordering Specify your DL650 or DL1000 Model Year to be sure to get the right SV Racing Parts, Scorpion Racing Skid Plate for your bike,

If you want to order in Silver that is also possible, Silver is an Anodized Finish, Satin Mat like, very much like the Silver Frame Colors,



I am taking pre-orders on 2012 Models right now, so feel free to Email me Directly at [email protected] for the Skid Plates for the New 2012 DL650 and DL1000 Models and be first to receive the New Skid Plates,

The Radiator Guards for the 2012 DL650 and the Oil Cooler and Radiator Guards for All Models DL1000 will be released with Skid Plate for these Models at the end of the first week of January. Price will all be the same as for 2004 - 2011 DL650 Models,

Visit me anytime at SVRacingParts.com

Enjoy the ride, and best regards,
Blair

Last edited by SV Racing Parts; 01-19-2012 at 10:12 PM.
SV Racing Parts is offline  
Sponsored Links
Advertisement
 
post #2 of 2 Old 01-17-2012, 09:10 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up 2012 DL650 and DL1000 Skid Plates are Shipping Now

The 2012 DL650 Skid Plates are Here For You Now, from SV Racing Parts. $199.99 all in including Upgraded Hardware Package and all Brackets.

Production is done and they are at the Powder Coaters for the Gorgeous Mat Black Finish that matches our bikes frames so well.

Suzuki was kind enough to allow us direct access to fit and measure the 2012 DL650 and the 2012 DL1000 Models so we know that our Skid Plates are bolt on easy to install.

Production on the 2012 Models is done right now and we have them released for shipping.

Here is the fit around the Clutch side, (right) and the Shifter side, (Left), of the 2012 Models.

It is an Excellent Fit, The 20 Year Wear Rated Finish is also Excellent,

Shipping is $25 to your door anywhere in the USA. The Double Welded, inside and outside joints is Super Robust and Weight is Only 7.2 lbs do to the superb engineering,

Here are some shots of the 2012 Skid Plates Fit on the Bike,




Here is a finished 2004 - 2011 DL650 Skid Plate ready to pack for shipping ,




These are Highly Robust Skid Plates, only 7.2 lbs in weight, Double Welded from inside of joints as well as outside of joints for extra strength, And Powder Coat Finished in a 20 Year Wear Rated material. This material is being used on off road vehicle Skid Plates and tubular style running boards very successfully without marking or chipping.

Our Skid Plate will definitely support the weight of the bike,

When ordering Specify your DL650 or DL1000 Model Year to be sure to get the right SV Racing Parts, Scorpion Racing Skid Plate for your Vstrom Model,

I will post up the actual 2012 model of Skid Plate as soon as we get them back ready to ship, The image below is for our 2004 - 2011 DL650 Vstrom Models.

Here is the Demo Skid Plate we made up as the test fit model Mounted on the test 2004 - 2011 DL650, The shipping versions have two rows of bolt mounts and fit all crash bar sets, These are on SW MoTech Crash Bars,





BTW: we use the Same Anodizing and Powder Coating facility as Pazzo Levers, well known for quality of finish; And once again, These are 20 Year Rated Finish Coats on our Skid Plates so you know they are going to last.

Cost Including Skid Plate, Mounting Brackets and Complete upgraded Mounting Hardware Kit is $199.99 all in with $30 Flat Rate Shipping to your door anywhere in the USA,

Perfect match to the Suzuki Black Frame.

This Mat Finish is the closest I have ever seen to a perfect match to the Black Suzuki Frame and is so subtle and smooth in texture you need to see it to fully appreciate how good it really is. AAA rating from me for excellence.

I am taking orders on 2012 Models right now, so feel free to Email me Directly at [email protected] for the New 2012 DL650 and DL1000 Models Skid Plates and be first to receive them,

You can order directly from the web site and Check out immediately, or Email me to send you an itemized PayPal to make it super easy,

If you would like to use your credit card directly I can clear your credit card for you and get you looked after right away, Sweet and Easy regardless of how you would like to process the order,

Price will all be the same as for 2004 - 2011 DL650 Models,

Visit me anytime at www.svracingparts.com]

Enjoy the ride, and best regards,
Blair

Last edited by SV Racing Parts; 01-22-2012 at 09:08 PM.
SV Racing Parts is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Stromtrooper Forum : Suzuki V-Strom Motorcycle Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome