New, SV Racing Parts, Frame Sliders for the DL650 and DL1000 - Stromtrooper Forum : Suzuki V-Strom Motorcycle Forums
SV Racing Parts

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 69 Old 12-16-2011, 10:31 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

Hi Everyone; The New Frame Sliders for the DL650 and DL1000 Models are all Machined, Finished, Packed Up and Ready to Ship,

These are easy to install products for my fellow Stromtroopers that will really help you minimize damage in the event of an unplanned mishap. I worked hard with these Frame Sliders to make the best product that I could for you,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Look Under, Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

These will take the hit first to minimize the damage if you ever go down,

Enjoy the ride, and best regards,
Blair
SV Racing Parts is offline  
Sponsored Links
Advertisement
 
post #2 of 69 Old 12-18-2011, 02:54 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

Hi Everyone; The New Frame Sliders for the DL650 and DL1000 Models are all Machined, Finished, Packed Up and Ready to Ship,

These are easy to install products for my fellow Stromtroopers that will really help you minimize damage in the event of an unplanned mishap. I worked hard with these Frame Sliders to make the best product that I could for you,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Look Under, Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

These will take the hit first to minimize the damage if you ever go down,

Enjoy the ride, and best regards,
Blair
SV Racing Parts is offline  
post #3 of 69 Old 01-08-2012, 03:47 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

Hi, We did the bolt on of the SV Racing Parts, Frame Sliders onto the DL1000 yesterday and they fit and looked great.

Both the DL1000 and the DL650 Frame Sliders are in stock and ready to ship right away,

We also did the SV Racing Parts Test Fit on the DL1000 Skid Plate Test Fit and it is awesome.

They are at the Powder Coaters for finishing now,

Email me Directly at [email protected] for them or order directly on line at SVRacingParts.com

Super Robust, Great Finish and Protection,

Enjoy the ride, and best regards,
Blair

Last edited by SV Racing Parts; 02-07-2012 at 12:59 PM.
SV Racing Parts is offline  
 
post #4 of 69 Old 03-18-2012, 12:25 AM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

Hi Everyone; The Frame Sliders for the DL650 and DL1000 Frame Sliders are all Machined, Packed Up and Ready to Ship,

These are easy to install products for my fellow Stromtroopers that will really help you minimize damage in the event of an unplanned mishap,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Look Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
SV Racing Parts is offline  
post #5 of 69 Old 04-17-2012, 04:32 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,

Last edited by SV Racing Parts; 05-12-2012 at 10:13 AM.
SV Racing Parts is offline  
post #6 of 69 Old 05-12-2012, 10:13 AM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,

Last edited by SV Racing Parts; 05-22-2012 at 10:55 PM.
SV Racing Parts is offline  
post #7 of 69 Old 05-22-2012, 10:55 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,

Last edited by SV Racing Parts; 06-02-2012 at 11:46 AM.
SV Racing Parts is offline  
post #8 of 69 Old 06-02-2012, 11:47 AM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,

Last edited by SV Racing Parts; 06-20-2012 at 11:21 PM.
SV Racing Parts is offline  
post #9 of 69 Old 06-20-2012, 11:21 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,

Last edited by SV Racing Parts; 07-07-2012 at 08:51 AM.
SV Racing Parts is offline  
post #10 of 69 Old 07-07-2012, 08:51 AM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,

Last edited by SV Racing Parts; 07-19-2012 at 11:03 PM.
SV Racing Parts is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Stromtrooper Forum : Suzuki V-Strom Motorcycle Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome