4 Piston Brake Caliper Upgrades - Stromtrooper Forum : Suzuki V-Strom Motorcycle Forums
SV Racing Parts

 
LinkBack Thread Tools Display Modes
post #1 of 3 Old 07-13-2011, 01:58 AM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up 4 Piston Brake Caliper Upgrades

Hi everyone, I get Emails all the time asking me which Calipers and what other parts really make the SV Racing Parts, 4 Piston Caliper Upgrades with our Adapter Brackets come together as the great package and upgrade it is,



Here is the information I send to everyone interested, Email me Directly at [email protected] Or Visit me at www.svracingparts.com

There are two choices on 4 Piston Calipers to use with our bikes; First; The Nissin 4 Piston Calipers from the Honda CBR600 F4 - F4i All Model Years 1999 to 2006, the CBR 929 – CBR 954 Model Years 2000 – 2003, or the CBR 600RR Model Years 2003 -2004.

The Nissin Calipers have 1mm larger pistons for a braking advantage. These are the calipers I use on my bikes.



Or; The Tokico 4 Piston Calipers from the GSXR 600 2001 - 2003, GSXR 750 2000 - 2003 and All Model Years of the SV1000, these are all the same Tokico Calipers,



You will need to let me know which Calipers you get, and I will ship you the correct Brake Caliper Adapter Brackets for them, $75,

I ship to internationally all the time so I am very familiar with the process and procedure to speed the parts to your door through customs at your end if you are not in the USA.

Shipping Internationally for the Brake Caliper Adapter Brackets as a stand-alone product is about $18 with $2 mandatory insurance,

I also carry and stock the correct superb Galfer HH Sintered Brake Pads for the Calipers, $35 per caliper so $70 total for the front calipers,

The Galfer Rear Brake Pads are also in stock for $35 per set,

We always recommend starting off with new brake pads as we never know how the caliper have been stored or what may have been spilled on them over time,

As well I have the Lifetime Guaranteed Galfer Black SS Brake Lines for our bikes in stock, $89.95 for the Black SS front lines, $49.95 for the DL1000 Black SS Clutch Line Kit, and $49.95 for the Black SS Rear Line Kit to match all the other lines and controls on our bikes.

The one other part I highly recommend is the SS Banjo Bleeder for the front brake master cylinder at your brake lever; They are $19.95 and come as either single for stock lines or Double for SS lines.

They allow you to bleed from the top at the master cylinder where the tiny air bubbles migrate and get trapped, contributing to spongy brake feel. All the higher end master cylinders and bikes now come with these as stock parts in them.

Everything is in stock and ready to ship, Email me Directly at [email protected] Or Visit me at www.svracingparts.com

Let me know whenever you are ready, I will PayPal invoice you for the parts you want and get you looked after right away,

Enjoy the ride, and best regards,
Blair

Last edited by SV Racing Parts; 07-23-2011 at 02:20 AM.
SV Racing Parts is offline  
Sponsored Links
Advertisement
 
post #2 of 3 Old 07-23-2011, 02:22 AM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up 4 Piston Brake Caliper Upgrades

Hi everyone, This is a sweet and easy way to bring your brakes up to standard, I have everything in stock and ready to ship now,



Here is the information I send to everyone interested, Email me Directly at [email protected] Or Visit me at SVRacingParts.com

There are two choices on 4 Piston Calipers to use with our bikes; First; The Nissin 4 Piston Calipers from the Honda CBR600 F4 - F4i All Model Years 1999 to 2006, the CBR 929 CBR 954 Model Years 2000 2003, or the CBR 600RR Model Years 2003 -2004.

The Nissin Calipers have 1mm larger pistons for a braking advantage. These are the calipers I use on my bikes.



Or; The Tokico 4 Piston Calipers from the GSXR 600 2001 - 2003, GSXR 750 2000 - 2003 and All Model Years of the SV1000, these are all the same Tokico Calipers,



You will need to let me know which Calipers you get, and I will ship you the correct Brake Caliper Adapter Brackets for them, $75,

I ship to internationally all the time so I am very familiar with the process and procedure to speed the parts to your door through customs at your end if you are not in the USA.

Shipping Internationally for the Brake Caliper Adapter Brackets as a stand-alone product is about $18 with $2 mandatory insurance,

I also carry and stock the correct superb Galfer HH Sintered Brake Pads for the Calipers, $35 per caliper so $70 total for the front calipers,

The Galfer Rear Brake Pads are also in stock for $35 per set,

We always recommend starting off with new brake pads as we never know how the caliper have been stored or what may have been spilled on them over time,

As well I have the Lifetime Guaranteed Galfer Black SS Brake Lines for our bikes in stock, $89.95 for the Black SS front lines, $49.95 for the DL1000 Black SS Clutch Line Kit, and $49.95 for the Black SS Rear Line Kit to match all the other lines and controls on our bikes.

The one other part I highly recommend is the SS Banjo Bleeder for the front brake master cylinder at your brake lever; They are $19.95 and come as either single for stock lines or Double for SS lines.

They allow you to bleed from the top at the master cylinder where the tiny air bubbles migrate and get trapped, contributing to spongy brake feel. All the higher end master cylinders and bikes now come with these as stock parts in them.

Everything is in stock and ready to ship, Email me Directly at [email protected] Or Visit me at SVRacingParts.com

Let me know whenever you are ready, I will PayPal invoice you for the parts you want and get you looked after right away,

Enjoy the ride, and best regards,
Blair
SV Racing Parts is offline  
post #3 of 3 Old 08-19-2011, 09:38 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up 4 Piston Brake Caliper Upgrades

Hi everyone, This is a sweet and easy way to bring your brakes up to standard, I have everything in stock and ready to ship now,



Here is the information I send to everyone interested, Email me Directly at [email protected] Or Visit me at SVRacingParts.com

There are two choices on 4 Piston Calipers to use with our bikes; First; The Nissin 4 Piston Calipers from the Honda CBR600 F4 - F4i All Model Years 1999 to 2006, the CBR 929 – CBR 954 Model Years 2000 – 2003, or the CBR 600RR Model Years 2003 -2004.

The Nissin Calipers have 1mm larger pistons for a braking advantage. These are the calipers I use on my bikes.



Or; The Tokico 4 Piston Calipers from the GSXR 600 2001 - 2003, GSXR 750 2000 - 2003 and All Model Years of the SV1000, these are all the same Tokico Calipers,



You will need to let me know which Calipers you get, and I will ship you the correct Brake Caliper Adapter Brackets for them, $75,

I ship to internationally all the time so I am very familiar with the process and procedure to speed the parts to your door through customs at your end if you are not in the USA.

Shipping Internationally for the Brake Caliper Adapter Brackets as a stand-alone product is about $18 with $2 mandatory insurance,

I also carry and stock the correct superb Galfer HH Sintered Brake Pads for the Calipers, $35 per caliper so $70 total for the front calipers,

The Galfer Rear Brake Pads are also in stock for $35 per set,

We always recommend starting off with new brake pads as we never know how the caliper have been stored or what may have been spilled on them over time,

As well I have the Lifetime Guaranteed Galfer Black SS Brake Lines for our bikes in stock, $89.95 for the Black SS front lines, $49.95 for the DL1000 Black SS Clutch Line Kit, and $49.95 for the Black SS Rear Line Kit to match all the other lines and controls on our bikes.

The one other part I highly recommend is the SS Banjo Bleeder for the front brake master cylinder at your brake lever; They are $19.95 and come as either single for stock lines or Double for SS lines.

They allow you to bleed from the top at the master cylinder where the tiny air bubbles migrate and get trapped, contributing to spongy brake feel. All the higher end master cylinders and bikes now come with these as stock parts in them.

Everything is in stock and ready to ship, Email me Directly at [email protected] Or Visit me at SVRacingParts.com

Let me know whenever you are ready, I will PayPal invoice you for the parts you want and get you looked after right away,

Enjoy the ride, and best regards,
Blair

Last edited by SV Racing Parts; 08-21-2011 at 01:19 PM.
SV Racing Parts is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Stromtrooper Forum : Suzuki V-Strom Motorcycle Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome