New, SV Racing Parts, Frame Sliders for the DL650 and DL1000 - Stromtrooper Forum : Suzuki V-Strom Motorcycle Forums
SV Racing Parts

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 82 Old 04-22-2014, 01:57 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
SV Racing Parts is offline  
Sponsored Links
Advertisement
 
post #2 of 82 Old 05-08-2014, 10:46 AM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
SV Racing Parts is offline  
post #3 of 82 Old 05-25-2014, 01:46 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
SV Racing Parts is offline  
 
post #4 of 82 Old 06-02-2014, 07:40 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
SV Racing Parts is offline  
post #5 of 82 Old 06-06-2014, 10:30 PM
Stromthusiast!
 
Join Date: Apr 2014
Location: OKC, OK
Posts: 21
Quick Service

Ordered my sliders on Wednesday and received them on Friday. Blair was prompt in responding to my emails and clearly interested in customer satisfaction.
Marty
mrtfnt is offline  
post #6 of 82 Old 06-14-2014, 11:24 PM
Stromthusiast!
Junior Trooper
 
Join Date: Feb 2013
Location: Calgary, Canada
Posts: 3
Nice product, quick delivery, easy install

Ordered up my frame sliders from Blair last weekend, he shipped on Monday and I received it at my home in Calgary on Fri after it had cleared customs. Easy peasy install (took all of 10 minutes). I really like the look of them and feel good about the extra protection they'll provide if the bike goes down.

Blair is a great guy to deal with......if you're considering frame sliders you won't be disappointed with these or the service Blair provides.
slchurchill is offline  
post #7 of 82 Old 06-26-2014, 01:18 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair
SV Racing Parts is offline  
post #8 of 82 Old 06-29-2014, 07:24 PM
Stromthusiast!
 
Join Date: May 2011
Location: PA
Posts: 25
AltRider Compatibility?

Very good looking for build quality......

BTW, thanks to you for all you have done for the cycle community.

Last edited by SV Racing Parts; 07-08-2014 at 08:52 PM.
nvrquit is offline  
post #9 of 82 Old 07-08-2014, 08:53 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up New, SV Racing Parts, Frame Sliders for the DL650 and DL1000

The Frame Sliders for the DL650 and DL1000 Frame Sliders are all machined, packed, and ready to ship,

Here is an Installation Video that another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

Email me for them at [email protected] or visit me at SVRacingParts.com Go in Under For Stromtroopers and then Under Frame Sliders

Here are some photos of the First Sets of the New Frame Sliders,



Mounted with either the Suzuki OEM Crash Bars or the SW MoTech Crash Bars,



Showing Clearance with the Suzuki OEM Crash Bars or the SW MoTech Crash Bars using a long level set flush at the end of the Sacrificial Puck on the Sliders,



Showing the Frame Sliders mounted as a stand alone product without any crash bars,



Showing the super clearance for protecting the vulnerable Radiator and other parts,



Mounted with Givi Crash Bars, and similar fit with the Hepco Becker Crash Bars,



Showing clearance between the Givi Crash Bars and MotoSliders Sacrificial puck on the MotoSliders Frame Sliders,

These are being producing in Polished Aluminum and it Black Anodized Finish for those with Black Frames that want to be color matched,



The Frame Sliders are just over 6 inches long with the Sacrificial pucks installed.

A lot of time, engineering and machining has gone into producing a very strong and robust Frame Slider for our bikes that can be adapted to work with all the crash bar sets we have tested so far,

Email me Directly for them at [email protected]

These are designed and built to really help you and your bike out in the event of an unplanned mishap or tip over,



I also have the matching Swing Arm Sliders with spools for rear stands for our bikes as well,

Everything is in stock and ready to ship,

Visit SVRacingParts.com to order them directly and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair

Last edited by SV Racing Parts; 07-21-2014 at 02:19 PM.
SV Racing Parts is offline  
post #10 of 82 Old 07-16-2014, 04:22 PM Thread Starter
Stromtrooper.com Sponsor
 
SV Racing Parts's Avatar
 
Join Date: Jan 2007
Location: Pacific Northwest, North America
Posts: 5,006
Thumbs up Installation Video for SV Racing Parts, Frame Sliders

Hey Everyone, here is an Installation Video another very happy SV Racing Parts Customer made up for me to post for all to use when installing these Awesome Frame Sliders for our DL650 and DL1000 Bikes,

https://www.youtube.com/watch?v=T8kDpcBVP1w

These parts are in stock and ready to ship to you today,

Enjoy the ride, and best regards,
Blair
SV Racing Parts is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Stromtrooper Forum : Suzuki V-Strom Motorcycle Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome