New Wing Mirror Indicators

PerazziMx14

7,153 posts · Joined 2016

• Add to quote
Only show this user

#2 · 3d ago

Cut the connector of the OEM turn signal and graft it onto the wiring on the mirror. Then it will pug into the bikes wiring harness with no modifications to the main harness.

 

A

AZ081000

157 posts · Joined 2022

• Add to quote
Only show this user

#3 · 3d ago

Before cutting the OEM turn signal connectors off, just to make sure you like the new mirrors; cut the connector off of the new mirrors harness, strip back the insulation about a cm, then push these ends into the back of the OEM turn signal connectors. Test to make sure they are making good enough contact, then use a plastic wire tye to hold the wires in place.
Once you have decided you like the mirrors, then you can make the connection permanent.

 

Stalky Tracker

6,880 posts · Joined 2005

• Add to quote
Only show this user

#4 · 3d ago

Lockhart-Phillips use make some conversion wiring with OEM connectors on one end, both ends, and splicing in two wires. Not sure if they are still business or if they still make them.

I would cut the connectors off the mirror wiring, then connect them to the turn signal wiring with Posi-Tap connectors.

Posi-Lock website

 

Stalky Tracker

6,880 posts · Joined 2005

• Add to quote
Only show this user

#5 · 3d ago

You may want to search Amazon for "Suzuki turn signal wire adapter", seems they have quite a few options too.

 

Improperly Torqued

4,210 posts · Joined 2008

• Add to quote
Only show this user

#6 · 3d ago

I'd contact Eastern Beaver. He seems to have all kinds of hard-to-find OEM connectors of this sort. (Also, wow, they've updated their website from its late-90s patina!)

Eastern Beaver Inc – Eastern Beaver Inc

Eastern Beaver is a manufacturer of accessory fuse boxes, dimmers, LED lights and wiring kits. We also do OEM kits for other companies.

www.easternbeaver.com

 

Rolex

8,424 posts · Joined 2013

• Add to quote
Only show this user

#7 · 3d ago

I think they use Mitsubishi ultra compact connectors on the bike.

You could make your own adaptors.

 

Y

Yarz1

608 posts · Joined 2013

• Add to quote
Only show this user

#8 · 3d ago

Tristan67 said:

I've decided to fit these wing mirrors with indicators in them. I don't really want to hack into the original loom so am looking for a male and female indicator to make a plug and play 2 into one connection. Any idea where i can get them from or what they are called ? Many Thanks 😎

Click to expand...

You can look for the connectors at Motorcycle Connectors