|Topic Review (Newest First)|
|07-01-2012 02:07 PM|
Just buy a Suzuki horn pigtail assembly. Find the unused connector behind the radiator for the heated grips (providing you don't already have grips installed) and plug it in...make sure you fuse it.
Sent from my iPhone using MO Free
|07-01-2012 12:59 PM|
Originally Posted by greywolf View Post
BTW, thanx for deleting the other, same post I did. I just didn't know how to delete it myself, so I figured you'd rise to the occasion.
|07-01-2012 11:40 AM|
If you don't get an Eastern Beaver connector and still want to tap a bike wire,
Basic V-Strom Wiring 101
|07-01-2012 10:30 AM|
|cwvet||Install the Eastern Beaver PC-3 or PC-8 instead. Then you have many options and don't need to splice into your existing wiring. Easy to install and not that expensive.|
|07-01-2012 03:20 AM|
Looking for Switched Power Source
I posted this in the "how to" section above, but I think that was the wrong place to do that, so I am posting it again here. Sorry for the confusion on my part.
I am mounting the J&M JMCB2003 CB radio on my '09 ABS Wee. Since I don't have a shop manual and an owner's manual didn't come with the bike (bought it used) I need some input on where to tap into a switched source of electrical power. I am guessing that the place to tap in would be one of the wires coming from the underside of the fuse holder. The question is, which one? I would appreciate some guidance here before I get into it any further, as I am not familiar with the ABS model. Thanks.