|Topic Review (Newest First)|
|10-31-2008 08:02 PM|
Originally Posted by allthejerretts View Post
I was thinking the same thing. Looks like one more should do the trick.
|10-31-2008 07:18 PM|
Sikaflex 150 contruction adhesive, black.
Comes in caulking tubes.
Find a bunch of other stuff that needs sealing when you open it.
Used it to fix a long leak in a plastic dirtbike fuel tank held up for two years until he sold it.
|10-31-2008 07:13 PM|
Rear shot, I have to work the next 3 days, so Tuesday I will try and fix the problems, as of now
2 Pelican 1430s, 1 Givi 350 Monolock top case
I need some more stickers
|10-31-2008 07:05 PM|
as for mounting the wrong way, I tried to match csr67 what he did. He had older racks, but they same brand, and his cases open up fine.
I am thinking about getting some steal tubing to space out the case better
|10-31-2008 07:01 PM|
Originally Posted by henerythe8th View Post
|10-31-2008 06:38 PM|
You installed the cases with the lids facing the wrong way...
If you put the hinges on the outside, then you'll avoid that issue.
There is information on the Pelican site regarding the correct type of glue that will work on the material in question.
Otherwise, since you're just plugging holes, so use silicone or JBWeld or epoxy.
Ever heard the old carpenter's rule?
|10-31-2008 06:30 PM|
|Bisbonian||I've used stainless button head allen bolts to fill in unwanted holes.|
|10-31-2008 05:13 PM|
Installed Pelican 1430's, Not Good
more holes than i needed, this pic was only first set of holes messed, up anyone have any idea what to fill the holes with
New SW-MOTECH Quick-Lock EVO Carrier, says to move rear blinkers I didn't do it, now i know why you need to move them
Anyway i am not happy with the results, I am thinking of making the left case a tool box, and buying a new case and starting over, one problem is that the left rack is different than the right rack, right case fits awesome, left side does not, i have to spend more time, i guess i am am going to unbolt it and move the rear blinkers,