I just had to remove the hollow front end to do and HID install, from what I remember:
-There are some pop rivets & a plastic piece at the front of the gas tank. Press the center of the rivets, and then remove. (Too reinstall the rivits laterpush the center part of the rivit so the center part is sticking out, then you push the rivit into place and then push the center, you will hear it click)
- The plastic pieces at the rear of the fairing are held on by a rod & grommet system plus 1 bolt.(allen wrench size 4 or 5).
- Remove remaining bolts, I think 3 on top and one at the bottom.
- Remove the front cowling under the lights. Theres about 6 or so pop rivets two being larger than what you have removed so far, and two screws.
-With the front cowl off you will find one last set of screws.
2011 SUZUKI DL650 V-Strom ABS/Pearl Mirage White
Farkles: Aprilia Tuono mirrors / Pat Walsh Design Super Brace / DL1000 Seat / Givi engine guards / RR Peg Lowering Kit / Madstad Bkt w/ OEM or Givi Shield / PL532 & E41nn / SW-Motech CenterStand / EB PC-8 - 2x power outlets - Datel Voltmeter - Stebel Horn with PWD setup - Digital Slim H4-3(9003) Bi-Xenon HID - 1157 LED Brake lights
Shiro Nakama Hachi [SIGPIC][/SIGPIC]