Stromtrooper Forum : Suzuki V-Strom Motorcycle Forums - View Profile: dmfdmf

dmfdmf dmfdmf is offline

Stromthusiast!

  Visitor Messages

Showing Visitor Messages 1 to 2 of 2
  1. Trepidator
    02-25-2016 03:54 PM - permalink
    Trepidator
    Thanks for your thoughts. I will respond after I get back home from work. Your point about over-cooked enamel is especially intriguing, as I have not accounted for the case where magnet wire is being taken well beyond its recommended temperature limit but not immediately failing. (It's a case we avoid by design in engineering where reliability is one of the objectives.)
  2. kiwi_outdoors
    11-23-2014 03:09 PM - permalink
    kiwi_outdoors
    I am in Oakland, with a DL650A (2007) and a shop manual and a whole bunch of tools. Holler if you need to borrow a tool and want a 2nd (non-expert) opinion. 510-482-4306 landline

  About Me

  • About dmfdmf
    Biography
    I am David
    Location
    California
    Interests
    Moto's and Epistemology
    Occupation
    IT
    Model V-Strom Owned
    Red L4 DL650A
  • Signature
    Pink Floyd: And did you exchange a walk-on part in the war for a lead role in a cage?
    ---------------------------------------------------------------------------------------------
    Current: 2014 V-Strom DL650 ABS Red
    Next Up: ?
    Past: Suzuki: DL650AK7, GS400; Honda: CB125, Express 49cc

  Statistics

Total Posts
Albums
Visitor Messages
General Information
  • Last Activity: 06-16-2019 01:39 AM
  • Join Date: 11-11-2012
  • Referrals: 0

  Mentions

02-27-2019
07:04 PM - dmfdmf mentioned MAZ4ME in post Blown ABS Control Unit / HU
I agree with MAZ4ME. I would test everyt...
02-26-2019
12:10 PM - OCADVR mentioned dmfdmf in post Speedo Fix
Ditto what dmfdmf said about the corre...
02-16-2019
04:16 PM - dmfdmf mentioned HokiesRWee in post Best and most complete "valve check/adjustment" procedure!!
HokiesRWee I did an adjustme...
02-14-2019
12:27 AM - dmfdmf mentioned pshell in post DL650 Average MPG
pshell My use case is simi...
10-16-2018
10:01 PM - dmfdmf mentioned realshelby in post Werks clutch review
realshelby I have a L4 Wee and...
10-09-2018
01:22 AM - dmfdmf mentioned Grimmer in post throttle body
Grimmer As far as I know, no...
01:22 AM - dmfdmf mentioned Jimi in post throttle body
... ISC is in spec. Jimi Your saga sounds ver...
10-08-2018
03:42 PM - dmfdmf mentioned Dwatracz in post Vibrations?
Dwatracz I see spoked wheels...
02:56 PM - Dwatracz mentioned dmfdmf in post Vibrations?
@dmfdmf Yesterday I found...
12:14 PM - dmfdmf mentioned Dwatracz in post Vibrations?
Dwatracz Without having a ...
09-30-2018
01:05 PM - dmfdmf mentioned notacop in post Leaf bits in tank?
... miles anyway. notacop Statement revised. S...
09-06-2018
01:38 AM - dmfdmf mentioned Hatchi in post Real maintenance items
Hatchi's list is pretty goo...
08-26-2018
07:26 PM - dmfdmf mentioned Spec in post 5th gear whine
...sprockets do not. I speculated HERE that the ...
07-30-2018
08:26 PM - dmfdmf mentioned Majster81 in post wonky idle 2012 650
Majster81 I did a quick sea...
07-09-2018
02:36 PM - dmfdmf mentioned realshelby in post Rotor Magnets went boom - long term prognosis?
realshelby I admit that you co...
07-03-2018
10:15 PM - dmfdmf mentioned notacop in post No power, blowing 30A fuse repeatedly
...d wiring harness as notacop suggested. However,...
05-05-2018
06:43 PM - davidp80 mentioned dmfdmf in post After an accident: Is this a bent frame?
Thanks, dmfdmf. I'll take a look. ...
05-01-2018
06:25 PM - davidp80 mentioned dmfdmf in post After an accident: Is this a bent frame?
Thanks, dmfdmf. Sounds like the...
11-20-2017
03:32 PM - gregrunt mentioned dmfdmf in post 2004 DL650 Idle Engine Chatter
...ping the engine? dmfdmf Thanks, how do you d...
03-06-2017
01:03 AM - dmfdmf mentioned Trepidator in post Stator issues
...ment, of course. Trepidator: Cool story, here ar...

  Quotes

06-08-2019
05:03 PM - dmfdmf quoted bandoeagle in post Harmonics around 5000 RPM
I have a 2013 Vstrom 650 DL bou...
05-26-2019
12:57 PM - dmfdmf quoted Tom-S in post Won't rev, bad idle, no codes!!
This is quite a mystery. ...
05-15-2019
04:44 PM - Niteryder quoted dmfdmf in post Avg. MPG's?
45-48MPG at +75MPH is not u...
05-14-2019
12:02 PM - petow23 quoted dmfdmf in post Narrower Gas Tank (Bad Hips)
You might have to switch to...
05-05-2019
08:01 PM - dmfdmf quoted Gingie in post Can spark plug boots be reattached?
I got the front cylinder pl...
04-30-2019
04:02 PM - dmfdmf quoted VSrider in post Super sensitive throttle
I could deal with it and hav...
04-20-2019
12:36 PM - dmfdmf quoted PeteW in post HELP! ABS module is dead
True, except only the 12ís...
12:36 PM - dmfdmf quoted Big B in post HELP! ABS module is dead
True, except only the 12ís...
03-22-2019
10:20 PM - Motor7 quoted dmfdmf in post DL 650A needs brake pads
I had EBC HH on my previous...
10:07 PM - dmfdmf quoted Motor7 in post DL 650A needs brake pads
In the past I was running t...
03-12-2019
03:21 AM - rattlinjack quoted dmfdmf in post Loose frame and engine mount bolts
Motor Mount Reseat & Retorq...
03-09-2019
08:15 PM - dmfdmf quoted rcmikewiebe in post Low vstrom 650 MPG
I have been averaging about 40 m...
03-01-2019
03:20 PM - dmfdmf quoted Draako in post Motorbike does not start with battery under 14V
In posts below I made a vid...
02:01 PM - wr6s11 quoted dmfdmf in post Clicking from voltage regulator 09 650
Welcome to the club. The...
02-27-2019
07:24 PM - dmfdmf quoted Dwighop in post Speedo Fix
Unfortunately RacerATB stopp...
03:46 PM - slane6 quoted dmfdmf in post
02-15-2019
04:13 PM - Motorpsychology quoted dmfdmf in post Part Identification!
On a project bike I damaged...
11:50 AM - dmfdmf quoted realshelby in post Part Identification!
That bar is the bikes swing arm...
12:04 AM - WingVetteStrom quoted dmfdmf in post Help, Fuel Injection code and I'm on the road
If it starts and runs while...
02-10-2019
11:36 AM - croissant_warrior quoted dmfdmf in post ISC valve replacement
With the bike warmed up and...
 
For the best viewing experience please update your browser to Google Chrome