Shark Teeth, Warthog, Wolf, Vstrom, Tank Graphics. - Stromtrooper Forum : Suzuki V-Strom Motorcycle Forums

Fozzyber · #1 01-19-2009, 11:01 PM

Well Warhammer started off with his shark teeth.
I had been thinking along the same lines.
Let me start off by saying that I do own my own sign company,
I own a large format solvent printer that allows me to do my own graphics.
I was considering producing graphics for V-Stroms, I thought of
starting off with a few designs and seeing how they would fair.
It would not be a pre-order, but a, you order, I ship.
Let me kow what you like, or something else you would like to see.
All designs could be done in high performance 3M Vinyl, or 3M reflective

rdman · #2 01-20-2009, 01:30 AM

I have a yellow wee. How about a bad-ass looking bumble-bee!! I am sure other yellow stromers out there would be interested in that decal!

Fozzyber · #3 01-20-2009, 01:47 AM

What would you think of something like this?
We have the Wee-Strom, the Vee-Strom and the all new BEE-Strom

Tomcat · #4 01-20-2009, 02:10 AM

I have been wanting a world map design,

rdman · #5 01-20-2009, 05:31 AM

Quote:

Originally Posted by Fozzyber

What would you think of something like this?
We have the Wee-Strom, the Vee-Strom and the all new BEE-Strom

That bee is bad-ass!! I personally like the factory stripe on my bike and would rather incorporate the bee with the factory graphic. I think it would fit nice with the factory decal. I would take 2, with the other being a mirror image. Any other yellow wee owners be interested in these??

greywolf · #6 01-20-2009, 07:36 AM

I like the, wait for it, wolf. I wonder about my ability do do a good job with a large sticker though. I'm good with the mechanical stuff, not so much the artistic.

TheTwins · #7 01-20-2009, 08:05 AM

I have a blue DL650, and I really like the wolf design. Can you mock that one up?

Fozzyber · #8 01-20-2009, 10:03 AM

One blue V with wolf

greywolf · #9 01-20-2009, 10:06 AM

Cool. How about an '07 or '09 Oort gray one.

Fozzyber · #10 01-20-2009, 10:10 AM

Quote:

Originally Posted by greywolf

I like the, wait for it, wolf. I wonder about my ability do do a good job with a large sticker though. I'm good with the mechanical stuff, not so much the artistic.

The material I use is not hard to apply, it does take some skill to lay down a 4'x10' sheet on a compound curve. But small stuff like this is not too bad depending on how much of the tank is covered.
The air release material 3M makes does make install much better, you can lay it on the tank and as long as it is not to hot and you dont press on it you can lift it back up and reposition

I was thinking of doing a install video to kind of show how it would be done.
I might get to that in the next day or two...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Suzuki V-Strom Forum Advertisement