ECM remapping

[bigtallguy]

Just ordered new pipes and am looking into getting the ecm remapped. For those of you that have done it, what settings have worked best for you with aftermarket pipes? I have searched but can't find a solid answer because it seems to vary for each model year. Should I put the pipes on first to see how it runs, then adjust if needed or just assume it will be needed and do it before adding the pipes?

[Big B]

Put your cans on, then make sure your TB's are in sync. See how she runs for a little while. If you know of a dealer that has a Yoshimura box, have them increase idle 1.5% and BOTH low and mid rev ranges to 5%. I have the Leo Vince exhausts with these settings, and TRUST me....you will be running leaner with these exhausts. I get as high as 51 mpg at times, and she runs pretty darn good. The remap helps but "ultimatley" we need a PCIII or Techlusion DFO to make it run darn near perfect. People that stay with the stock system, have excellent results with a remap. Best of luck!!!!