trailbuster30
01-06-2006, 01:54 PM
I've had great results using this stuff over the years in my cars and bikes. After having the Main seal start leaking on our old Lincoln a few years ago I dumped some in and in a few days the leak had stopped. Also worked great on a VW Dasher that had shrunken injector seals that had been leaking, being to cheap to replace them I smeared some stop leak on them and shoved them back in. After a couple days I tugged on the injectors to see if the stop leak had worked, to my surprise they were no longer loose. It appeared that the stop leak had puffed up the o rings and they were now tight.
In our two newer vehicles I add a little just as a precaution to help prevent the seals from shrinking. I also add about a 1/2 oz. to my strom when I change oil.
I've used all the major brands Bars,Eagle etc and they seem to perform equally well.
Dan
In our two newer vehicles I add a little just as a precaution to help prevent the seals from shrinking. I also add about a 1/2 oz. to my strom when I change oil.
I've used all the major brands Bars,Eagle etc and they seem to perform equally well.
Dan