AP-1 Fusebox mount, and 12v adapter plug Install

[Tollster]

I finished up my 12 plug in and my fuse box. I didnot go under the seat as I never have enough storage areas. I used an area , that I believe to be a first for this install of the fuse box.

http://vstrom.info/vsri-gallery/gallery/d/71023-2/Motorcycle+Wiring+013.jpg

http://vstrom.info/vsri-gallery/gallery/d/71020-2/Motorcycle+Wiring+012.jpg

http://vstrom.info/vsri-gallery/gallery/d/71032-2/Motorcycle+Wiring+020.jpg


I ran the 2 15 amp fuses to this dash, the small led in the middle tells me current amperage draw, by chaging colors which is red < 10 amps, yellow 10-11 amps, and green 12 and greater. I have spare fuse openings that I wired into molex connectors and now have the plugs ready for future upgrades, fog lamps and the like.
http://vstrom.info/vsri-gallery/gallery/d/71026-2/Motorcycle+Wiring+015.jpg

http://vstrom.info/vsri-gallery/gallery/d/71029-2/Motorcycle+Wiring+022.jpg

[tophski]

pretty cool!
I like the led idea. Wish I was confident enough to attempt that.

[Heavy]

Good location for the fuse block.

I like it. Don't think a BlueSeas will fit in there but cool anyway.

[cmosentine]

An absolutely sweet location for the fuse box. Great job.:)

[Bimjo]

Tollster- do you remember where you got the power sockets? I'm looking to run Rick's shelf set up like yours is.

Thanks!