Uly Pegs Install

[Frenchie]

When installing front Uly pegs, how was the pin size to hole size differential taken care of.
I read the pin at 8mm and the hole through the peg at 11mm.

[Heavy]

I just picked up a set of the Uly pegs on Friday.

Pin is about 8mm, or 5/16" and hole in peg is 7/16", or 11mm.

Sleeve will need to be about 7/8", or 22 mm long to sit in the peg.

[awd505]

I bought a set of these and I am not happy with the foot placement. Instead of my foot being directly in-line to the brake and shift controls I have to crank my toes in to engage them due to the new position being lower (which is fine) but out away from the frame. Am I missing something. How do You like the foot postion?

Plus the angle of the foot area is angled forward so have less flat surface compared to the stock pegs.

The pin hole size is not the issue for me. I could figure that part out.

Any pictures with feet on the pegs to show the foot position?