Pazzo clutch lever "sticking"

[DougDM]

Part 1: I got a set of Pazzo's for my DL1K and the Wifey's Wee. Initally I didn't have a problem, but after 200 miles, the ball on the clutch lever on the 1K started to bump the handguard. Later it would actually interfere enough to hold the level in and I could let go and it would stick.

Easy to fix, I "Dremeled" out the plastic of the guard and problem was solved.

http://img201.imageshack.us/img201/8549/pazzoclutch0016zb4.jpg

Part 2: I got a set of handguards for the Wifeys Wee and the clutch lever adjustment lever would rub on the top of the guard. Out came the "Dremel" again. Problem solved.

[MZBuckeye]

Huh. No problems for me yet, but I'll keep an eye on it.

[Big B]

No problem with my $14 clutch lever from Ebay!;)

[Quebecois]

No problem with my $14 clutch lever from Ebay!;)

No problem on my stock lever. Plus you get it for free when you buy the bike! ;)

[DougDM]

As it turns out, the handguard at the end had started to come out from under the bar weight. Still, why the Pazzo hits it and the stock doesn't is a bit unnerving.

[bry_wang]

just get the short lever version no?